background image

C

HAPTER

 4

  |  Configuring the Router

Access Control

–  91  –

3.

Select a host from the Host drop-down list or choose “Click Here To Add 
New Host List”.

4.

Select a target from the Target drop-sown list or choose “Click Here To 
Add New Target List”.

5.

Select a schedule from the Schedule drop-down list or choose “Click 
Here To Add New Schedule”.

6.

In the Action field, select Deny or Allow.

7.

In the Status field, select Enabled or Disabled to enable or disable your 
entry.

Click the Save button.

Click the Enable All button to enable all the rules in the list.

Click the Disable All button to disable all the rules in the list.

Click the Delete All button to delete all the entries in the table.

You can change the entry’s order as desired. Fore entries are before hind 

entries. Enter the ID number in the first box you want to move and another 

ID number in second box you want to move to, and then click the Move 

button to change the entry’s order.

Click the Next button to go to the next page, or click the Previous button 

return to the previous page.

Figure 78:  Add or Modity Internet Access Control Entry

For example: If you desire to allow the host with MAC address 00-11-22-

33-44-AA to access www.google.com only from 18:00 to 20:00 on 

Saturday and Sunday, and forbid other hosts in the LAN to access the 

Internet, you should follow the settings below: 

1.

Click “Access Control->Host” in the left to enter the Host Settings page. 
Add a new entry with the Host Description is Host_1 and MAC Address 

is 00-11-22-33-44-AA. 

Содержание SMCWBR14S-N5








































































































































Отзывы: