SMCCO10-Z CO Alarm User Guide
Copyright
©
2013 SMC Networks
Page 9
All Rights Reserved
I/M SMCC010-Z rev. 1.0
1/23/2013
9/3/10
E.
Replace the battery while still
pressing the tamper switch, then
release the switch. The RF Module
LED flashes three times to signal the
detector is not paired with a
Touchscreen.
F.
Reinstall the front cover.
8
Viewing Event History
To view event history:
A.
Tap the Security widget on the
Home screen.
B.
Tap the
History
tab. The Zone Event
History shows the event history
9
Disabling Zones
The system can bypass a zone, so the
zone is not monitored when the system is
armed. This is useful when a sensor is
being repaired. You can only change the
Bypass state of a zone when the system is
disarmed.
The system continues to log the activity
of bypassed zones in the Event History
(see “View Zone Event History” on this
page).
To bypass a zone:
A.
With the system disarmed, tap the
Security app on the Home screen.
B.
Tap the
Turn Zone Off
button for
the smoke alarm. The
Turn Zone
Off
button changes to
Turn
Zone
On
.
C.
When the system is disarmed, the
Security Status header shows that
some zones have been bypassed.
10
Deleting a Sensor
Deleting a sensor from the premises
removes it from being monitored by the
customer’s system. This is not the same
as disabling (bypassing) a sensor. You
should delete a sensor only:
If the product is being removed
from the premises
To reset the product to factory
default settings by deleting the
product and adding it immediately.
To delete a product from the system:
A.
Contact Customer Care to obtain
the Premise Passphrase for the
current customer account.
LED
