![background image](http://html1.mh-extra.com/html/smc-networks/smcco10-z/smcco10-z_user-manual_1299212013.webp)
SMCCO10-Z CO Alarm User Guide
Copyright
©
2013 SMC Networks
Page 13
All Rights Reserved
I/M SMCCO10-Z rev. 1.0
1/23/2013
9/3/10
13
Maintenance Tips
The SMCCO10-Z is designed for a long
service life of 10-years. Although the
Touchscreen might indicate when to
service the SMCCO10-Z, several checks
are recommended.
Weekly - CO Alarm Test.
Annual - CO Alarm Functional Gas
Test.
Random - visual check for green
Power LED flashing every 30 seconds
and for wireless signal strength.
Touchscreen indications are Trouble and
Low Battery.
Trouble - SMCCO10-Z has an internal
fault requiring technical service.
Low Battery - batteries must be
replaced for proper operation.
General Tips
Vacuum the SMCCO10-Z cover each
month to remove accumulated dust.
Never use detergents or solvents to
clean the SMCCO10-Z. They can
permanently damage or temporarily
contaminate the sensor.
Avoid spraying air fresheners, hair
spray, paint, or other aerosols near
the product.
Do not paint the SMCCO10-Z. Paint
will seal the vents and interfere
with proper sensor operation.
Move the SMCCO10-Z to a remote
location to prevent possible damage
or contamination prior to:
Staining or stripping floors or
furniture, painting or wall-papering.
Using aerosols or adhesives.
WARNING:
Reinstall the SMCCO10-Z as
soon as possible for continuous
protection.
The following substances can damage the
SMCCO10-Z or cause temporary readings
that are not CO readings:
Ethylene
Ethanol
Alcohol
Iso-propanol
Benzene
Toluene
Ethyl acetate
Hydrogen
Hydrogen sulfide
Sulfur dioxide
Included in this list are most:
Aerosol sprays
Alcohol-based
products
Paints, thinners,
solvents, and
adhesives
Hair sprays,
after shaves,
and perfumes
Auto exhausts
(cold start)
Some cleaning
agents