SMCCO10-Z CO Alarm User Guide
Copyright
©
2012 SMC Networks
Page 12
All Rights Reserved
I/M SMCC010-Z rev. 1.0
12/16/12
9/3/10
Operating Characteristics
LED Display
Alarm Sound
Unit Status
Touchscreen Status
Recommendation
Normal operation
Green Power LED flashes
every 30 seconds.
None.
Normal DC operation
(sensing no CO) and with
good batteries.
Normal operating
condition.
None.
Carbon monoxide
alarm
Red Alarm LED flashes with
beeps.
Four quick beeps, 5
seconds silence,
repeating.
Alarm condition. Dangerous
concentrations of CO
detected.
Alarm condition.
None
Low battery / low
battery hush
Red Alarm LED flashes
every 60 seconds.
One quick beep
every 60 seconds.
Batteries need to be
replaced.
Trouble condition, trouble
beeps every 60 seconds.
Replace all 3 AA batteries. Press Test/Hush
button
and release to silence the low-battery audible chirp
from 8-11 hours, allowing for a convenient time to
replace the batteries.
Alarm end-of-life
indicator
Red Alarm LED flashes two
times every 30 seconds.
Two quick beeps
every 30 seconds.
End of CO alarm life.
Trouble condition, trouble
beeps every 60 seconds.
Press the Test/Hush button and release to silence
the end-of-life signal for up to 3 days. After 3 days,
unit resumes end-of-life chirps. Hush mode silences
the alarm 10 times or up to 30 days. After 30 days,
the unit can no longer be hushed. Replace the CO
alarm immediately. Unit will not respond to CO.
Trouble/service
alarm
Red Alarm LED flashes
every 30 seconds.
One quick beep
every 30 seconds.
Unit is in trouble condition.
Trouble condition, trouble
beeps every 60 seconds.
Replace batteries. If condition continues, unit has
malfunctioned. Replace immediately. Unit will not
respond to CO.
Error condition
Red Alarm LED constantly
ON.
Constant alarm.
Very low battery or unit
malfunction.
Trouble condition, trouble
beeps every 60 seconds.
Replace batteries. If condition continues, unit has
malfunctioned. Replace immediately. Unit will not
respond to CO.
Test mode
Red Alarm LED flashes with
beeps.
Four quick beeps, 5
seconds silence,
repeated once.
Normal operation when
Test/Hush button is pressed.
Sensor test mode
CO not detected. Alarm for test purposes only.
Tamper
Red Alarm LED flashes
every 30 seconds.
One quick beep
every 30 seconds.
Unit is in tamper condition.
Trouble condition, trouble
beeps every 60 seconds.
Place alarm body back onto mounting plate. If
condition continues, unit has malfunctioned.
Replace immediately.
