SMC Networks ISA3-F series, Руководство по эксплуатации

Страница: 46 / 116

4 How to use
-45-
No.PS
※※
-OMW0009-A
■
Measurement mode

Placement verification screen (Main display)
The Placement condition is indicated by the switch output status (ON/OFF).

Level meter (Sub display)
Element Description
Switch point value bar
When OUT1 is set to hysteresis mode, the bar equivalent to the switch point, which has
been set as the set value of OUT1, is displayed automatically.

: OUT1 switch point only When OUT1 is set to window comparator mode, the bar will not be
displayed.
Level meter
The workpiece gap condition approaching the nozzle is indicated by the number of "
.
"
displayed.
This display is a reference only. It is not an accurate distance measurement.
○Relationship between the display and the placement status
(e.g.: hysteresis mode, reversed output)
Display Placement status Switch output
Level meter " " is
not displayed.
Detection surface
and the workpiece
are very distant.
Switch output is OFF.
・
・
・
Switch point value
bar "- -" and level
meter " " are not
close.
Detection surface
and the workpiece
are too far apart.
Switch output is OFF.
Switch point value
bar "- -" and level
meter " " are
close.
Detection surface
and the workpiece
are slightly apart.
Switch output is OFF.
Level meter " "
has reached
switch point value
bar "- -".
Workpiece is
placed on the
detection surface.
Switch output is ON.
Level meter " "
reaches its
maximum.
Workpiece is in
close contact with
the detection
surface.
Switch output is ON.

: For normal output, the switch point is displayed on the left side.
Placement surface
(Detection nozzle)