SMC Networks HRS018-A*-20-*, Руководство по эксплуатации

Страница: 21 / 162

HRX-OM-W058
Chapter 2 Name and Function of Parts
HRS-R Series 2.4 Operation display panel
2-5
2.4 Operation display panel
The operation panel on the front of the product controls the basic operation
of the product.
Fig. 2-3 Operation display panel
Table 2-3 Operation display panel
No Description Function
Reference
page
1
Digital display
(7 segment,
4 digits)
PV
Displays the temperature and pressure of the circulating
fluid and alarm codes.
5.3
SV
Displays the set temperature of the circulating fluid and
the set values of other menus.
2 [
o
C
o
F ] lamp Displays the unit of display temperature (
o
C
or
o
F). 5.13
3 [MPa PSI] lamp Displays the unit of display pressure (MPa or PSI). 5.14
4 [REMOTE] lamp Lights up during remote operation by communication. 5.19
5 [RUN] lamp
・
Lights up when the product is started and in operation. Goes off
when the product is stopped.
・
Flashes during stand-by for stop (Interval 0.5 seconds).
・
Flashes during independent operation of the pump (Interval
0.3 seconds).
・
Flashes during anti-freezing function (At standby: Interval 2
seconds, At operation: Interval 0.3 seconds).
4.4
6 [ALARM] lamp Flashes with buzzer when alarm occurs (Interval 0.3 seconds). 5.4
7 [ ] lamp Lights up when the tank level indicator falls below the LOW level. 4.3
8
[ ] lamp Lights up while the run timer or stop timer function is working. 5.7
9
[ ] lamp
Lights up when the product is in automatic operation.
5.10
10 [RUN/STOP] key
Makes the product start or stop.
4.4
11 [MENU] key
Shifts the main menu (display screen of temperature) the other
menu (entry of set values and monitor screen).
5.2
12 [SEL] key
Changes the item in menu and enters the set value.
13
[▼] key
Decreases the set value.
-
14
[▲] key
Increases the set value.
15 [PUMP] key
When the [MENU] and [RUN/STOP] keys are held down
simultaneously, the pump starts running independently.
4.3
16 [RESET] key
Keep the [▼] and [▲] keys pressed down simultaneously. This will
stop the alarm buzzer and reset the [ALARM] lamp.
7.3