SMC Networks EZ Switch SMCGS24C-Smart Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 118

background image

C

ONFIGURING

THE

S

WITCH

5-32

Note:

QinQ “customer” ports are those ports that are connected to

normal VLAN aware switches in the customer’s network. QinQ
“network” ports are those which are connected to the service
provider's network. To tunnel packets through a service
provider’s metro network, QinQ needs to be enabled on the
network port.

• Packet Type

– Sets the interface to accept all frame types, including

tagged or untagged frames, or only tagged frames. When set to receive
all frame types, any received frames that are untagged are assigned to the
default VLAN. PCs should be connected to ports with Packet Type set
to “All.” PCs cannot, in general, send or receive tagged packets. Switches
should be connected to each other with Packet Type set to “Tagged.” If
the Packet Type is set to “All,” the port can accept incoming tagged and
untagged packets. Untagged packets will be associated with the VLAN
identified by the PVID. Tagged packets will be dropped unless the port
is a member of the VLAN identified by the VLAN tag in the packet.
Outgoing packets will be tagged unless the packet’s VLAN ID is the
same as the PVID. If the Packet Type is set to “Tagged,” the port will
drop untagged packets and will only send and receive tagged packets.
Tagged packets will be dropped unless the port is a member of the
VLAN identified by the VLAN tag in the packet. The PVID has no
effect in this case.(Option: All, Tagged; Default: All)

•

PVID

– VLAN ID assigned to untagged frames received on the

interface. The PVID (Port VLAN ID) is the VLAN ID that is associated
with untagged, ingress packets. It is not possible to remove a port from
VLAN 1 unless its PVID has been changed to something other than 1.
The PVID has no effect on ports that have Packet Type set to Tagged.
(Default: 1)

«
...
80
81
82
83
84
...
»

Содержание EZ Switch SMCGS24C-Smart























































































































Отзывы:

Нет отзывов

Похожие инструкции для EZ Switch SMCGS24C-Smart

Бренд: i3 International Страницы: 2

Бренд: tbs electronics Страницы: 2

IP-Reach IPR-M1

Бренд: Raritan Страницы: 4

Бренд: Lantronix Страницы: 2

Бренд: Communica Страницы: 5

Бренд: BERNSTEIN Страницы: 3

Бренд: StarTech.com Страницы: 24

Бренд: IOGear Страницы: 10

Бренд: Edge-Core Страницы: 9

Бренд: GE Страницы: 50

Бренд: Radial Engineering Страницы: 8

JTECH-4KPIP0401

Бренд: J-Tech Digital Страницы: 10

Бренд: LEGRAND Страницы: 140

Бренд: M-system Страницы: 4

Бренд: Qvis Страницы: 7

Бренд: Linksys Страницы: 4

Бренд: Banner Страницы: 8

Clear Switch CF-POE8

Бренд: ANTIFERENCE Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды