C
HAPTER
4
| Initial Configuration
Setup Wizard
– 38 –
The following items are displayed on this page:
◆
Ethernet Port
— Select “L2TP” for the WAN port connection from the
drop-down list.
◆
USB Port
— Enables support for a WAN connection using a USB 3G
modem. For more information, see
“Step 3 - WAN Settings - 3G” on
page 39
. (Default: Disabled)
◆
Server IP
— Sets the L2TP server IP Address. (Default: l2tp_server)
◆
User Name
— Sets the L2TP user name for the WAN port.
(Default: l2tp_user; Range: 1~32 characters)
◆
Password
— Sets a L2TP password for the WAN port. (Default:
l2tp_password; Range: 1~32 characters)
◆
Verify Password
— Prompts you to re-enter your chosen password.
◆
Address Mode
— Sets a L2TP network mode. (Default: Static)
◆
IP Address
— Sets the static IP address. (Default: 0.0.0.0, available
when L2TP Network Mode is set to static IP.)
◆
Subnet Mask
— Sets the static IP subnet mask. (Default:
255.255.255.0, available when L2TP Network Mode is set to static IP.)
◆
Default Gateway
— The IP address of a router that is used when the
requested destination IP address is not on the local subnet.
◆
Enable MAC Clone
— Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change the
MAC address of the wireless 3G Broadband Router's WAN interface to
match the PC's MAC address provided to your ISP for registration. You
can enter the registered MAC address manually by typing it in the
boxes provided. Otherwise, connect only the PC with the registered
MAC address to the wireless 3G Broadband Router, then click the “Clone
Your PC’s MAC Address.” (Default: Disabled)
Содержание Barricade SMCWBR14S-3GN
Страница 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Страница 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Страница 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Страница 126: ...SMCWBR14S 3GN ...