C
HAPTER
6
| Network Settings
Advanced Routing
– 60 –
◆
LLTD
— Link Layer Topology Discovery (LLTD) is a Microsoft proprietary
discovery protocol which can be used for both wired and wireless
networks. (Options: Disable/Enable, Default: Enabled)
◆
IGMP Proxy
— Enables IGMP proxy on the wireless 3G Broadband
Router. (Options: Disable/Enable, Default: Disabled)
◆
UPNP
— Allows the device to advertise its UPnP capabilities. (Default:
Enabled)
◆
PPPoE Relay
— When enabled, the wireless 3G Broadband Router will
forward PPPoE messages to clients. Clients are then able to connect to
the PPPoE service through the WAN port. (Options: Disable/Enable,
Default: Disabled)
A
DVANCED
R
OUTING
Routing setup allows a manual method to set up routing between
networks. The network administrator configures static routes by entering
routes directly into the routing table. Static routing has the advantage of
being predictable and easy to configure.
A
DVANCED
R
OUTING
S
ETTINGS
This screen is used to manually configure static routes to other IP
networks, subnetworks, or hosts. Click “Network Settings” followed by
“Advanced Routing.” (Maximum 32 entries are allowed.)
Figure 33: Advanced Routing (Router Mode)
The following items are displayed on this page:
◆
Destination
— A destination network or specific host to which packets
can be routed.
◆
Type
— Defines the type of destination. (Options: Host/Net, Default:
Host)
Содержание Barricade SMCWBR14S-3GN
Страница 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Страница 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Страница 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Страница 126: ...SMCWBR14S 3GN ...