C
HAPTER
1
| Introduction
Hardware Description
– 17 –
A
NTENNAS
The access point includes integrated MIMO antennas for wireless
communications. A MIMO antenna system uses two or more identical
antennas to receive and transmit signals, helping to increase data
throughput and range. The antennas transmit the outgoing signal as a
toroidal sphere (doughnut shaped), with the coverage extending most in a
direction perpendicular to the antenna. The antenna should be adjusted to
an angle that provides the appropriate coverage for the service area.
LED I
NDICATORS
The wireless 3G Broadband Router includes four status LED indicators, as
described in the following figure and table.
Figure 2: LEDs
Table 2: LED Behavior
LED
Status
Description
Power
On Blue
The unit is receiving power and is operating normally.
Off
There is no power currently being supplied to the
unit.
WLAN
On/Blinking Blue
The 802.11n radio is enabled and
transmitting or receiving data through wireless links.
Off
The 802.11n radio is disabled.
WPS
On Blue
Indicates the WPS authentication of a device has
been successfully completed.
Fast Blinking Blue
Indicates the WPS authentication of a client device is
in progress.
If the WPS authentication of a device does not
complete after 120 seconds, the LED changes to Slow
Blinking.
Slow Blinking Blue
Indicates the WPS authentication of a device did not
complete after 120 seconds. The LED status does not
change until the user restarts or disables the WPS
connection.
Off
The WPS is not in progress.
Содержание Barricade SMCWBR14S-3GN
Страница 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Страница 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Страница 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Страница 126: ...SMCWBR14S 3GN ...