SMC Networks Barricade SMCWBR14S-3GN, Руководство пользователя

Страница: 85 / 126

C
HAPTER
7
| Wireless Configuration
Wireless Distribution System (WDS)
– 85 –
Figure 52: WDS Configuration
The WDS settings configure WDS related parameters. Up to four MAC
addresses can be specified for each unit in the WDS network. WDS links
may either be manually configured (Bridge and Repeater modes) or auto-
discovered (Lazy mode).
The following items are displayed on this page:
◆
WDS Mode — Selects the WDS mode of the SSID. (Options: Disabled,
Lazy, Bridge, Repeater. Default: Disabled)
■
Disabled : WDS is disabled.
■
Lazy : Operates in an automatic mode that detects and learns WDS
peer addresses from received WDS packets, without the need to
configure a WDS MAC list entry. This feature allows the wireless 3G
Broadband Router to associate with other wireless 3G Broadband
Routers in the network and use their WDS MAC list. Lazy mode
requires one other wireless 3G Broadband Router within the
wireless network that is configured in Bridge or Repeater mode, and
has a configured MAC address list.
■
Bridge : Operates as a standard bridge that forwards traffic
between WDS links (links that connect to other units in Repeater or
Lazy mode). The MAC addresses of WDS peers must be configured
on the wireless 3G Broadband Router.
■
Repeater : Operates as a wireless repeater, extending the range for
remote wireless clients and connecting them to an AP connected to
the wired network. The MAC addresses of WDS peers must be
configured on the wireless 3G Broadband Router.
◆
Physical — The radio media coding used on all WDS links. CCK
corresponds to 11b, OFDM corresponds to 11g, and HTMIX corresponds
to 11n.