SMC Networks 8926EM Скачать руководство пользователя

Страница: 281 / 792

Configuring Quality of Service Parameters

14-5

•

Add Policy

– Opens the “Policy Configuration” page. Enter a policy name and

description on this page, and click Add to open the “Policy Rule Settings” page.
Enter the criteria used to service ingress traffic on this page.

•

Remove Policy

– Deletes a specified policy.

Policy Configuration

•

Policy Name

— Name of policy map. (Range: 1-16 characters)

•

Description

– A brief description of a policy map. (Range: 1-64 characters)

•

Add

– Adds the specified policy.

•

Back

– Returns to previous page with making any changes.

Policy Rule Settings

- Class Settings -

•

Class Name

– Name of class map.

•

Action

– Shows the service provided to ingress traffic by setting a CoS, DSCP, or

IP Precedence value in a matching packet (as specified in Match Class Settings on
page 14-2).

•

Meter

– The maximum throughput and burst rate.

Rate (kbps)

– Rate in kilobits per second.

Burst (byte)

– Burst in bytes.

•

Exceed Action

– Specifies whether the traffic that exceeds the specified rate will

be dropped or the DSCP service level will be reduced.

•

Remove Class

– Deletes a class.

- Policy Options -

•

Class Name

– Name of class map.

•

Action

– Configures the service provided to ingress traffic by setting a CoS, DSCP,

or IP Precedence value in a matching packet (as specified in Match Class Settings
on page 14-2).

(Range - CoS: 0-7, DSCP: 0-63, IP Precedence: 0-7,

IPv6 DSCP: 0-63)

•

Meter

– Check this to define the maximum throughput, burst rate, and the action

that results from a policy violation.
-

Rate (kbps)

– Rate in kilobits per second. (Range: 1-100000 kbps or maximum

port speed, whichever is lower)

Burst (byte)

– Burst in bytes. (Range: 64-524288)

•

Exceed

– Specifies whether the traffic that exceeds the specified rate or burst will

be dropped or the DSCP service level will be reduced.
-

Set

– Decreases DSCP priority for out of conformance traffic. (Range: 0-63).

Drop

– Drops out of conformance traffic.

•

Add

– Adds the specified criteria to the policy map.

Содержание 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8926EM

Отзывы:

Похожие инструкции для 8926EM

Бренды по названию

Популярные бренды

SMC Networks 8926EM, Руководство по управлению

Результаты поиска

Содержание 8926EM

Отзывы:

Похожие инструкции для 8926EM

Бренды по названию

Популярные бренды