Basic Management Tasks
4-24
4
To start the new firmware, enter the “reload” command or reboot the system.
Saving or Restoring Configuration Settings
You can upload/download configuration settings to/from a TFTP server, or copy files
to and from switch units in a stack. The configuration file can be later downloaded to
restore the switch’s settings.
Command Attributes
• File Transfer Method – The configuration copy operation includes these options:
- file to file
– Copies a file within the switch directory, assigning it a new name.
- file to running-config
– Copies a file in the switch to the running configuration.
- file to startup-config
– Copies a file in the switch to the startup configuration.
- file to tftp
– Copies a file from the switch to a TFTP server.
- running-config to file
– Copies the running configuration to a file.
- running-config to startup-config
– Copies the running config to the startup config.
- running-config to tftp
– Copies the running configuration to a TFTP server.
- startup-config to file
– Copies the startup configuration to a file on the switch.
- startup-config to running-config
– Copies the startup config to the running config.
- startup-config to tftp
– Copies the startup configuration to a TFTP server.
- tftp to file
– Copies a file from a TFTP server to the switch.
- tftp to running-config
– Copies a file from a TFTP server to the running config.
- tftp to startup-config
– Copies a file from a TFTP server to the startup config.
- file to unit
– Copies a file from this switch to another unit in the stack.
- unit to file
– Copies a file from another unit in the stack to this switch.
•
TFTP Server IP Address
– The IP address of a TFTP server.
•
File Type
– Specify config (configuration) to copy configuration settings.
•
File Name
— The configuration file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the maximum length
for file names on the TFTP server is 127 characters or 31 characters for files on
the switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
•
Source/Destination Unit
– Stack unit. (Range: 1 - 8)
Console#copy tftp file
23-11
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: SMC8926_50EM_opcode_V1.1.4.0.BIX
Destination file name: V1140
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#config
Console(config)#boot system opcode:V1140
23-16
Console(config)#exit
Console#reload
22-4
Содержание 8926EM
