manualshive.com logo in svg

SMC Networks 8926EM, Руководство по управлению

Поделиться
Скачать
SMC Networks 8926EM Скачать руководство пользователя страница 236

VLAN Configuration

11-8

11

Adding Static Members to VLANs 

(VLAN Index)

Use the VLAN Static Table to configure port members for the selected VLAN index. 
Assign ports as tagged if they are connected to 802.1Q VLAN compliant devices, or 
untagged they are not connected to any VLAN-aware devices. Or configure a port 
as forbidden to prevent the switch from automatically adding it to a VLAN via the 
GVRP protocol.

Notes: 1.

You can also use the VLAN Static Membership by Port page to configure 
VLAN groups based on the port index (page 9). However, note that this 
configuration page can only add ports to a VLAN as tagged members.

2.

VLAN 1 is the default untagged VLAN containing all ports on the switch, and 
can only be modified by first reassigning the default port VLAN ID as 
described under "Configuring VLAN Behavior for Interfaces" on page 11-10.

Command Attributes 

•

VLAN

 – ID of configured VLAN (1-4093).

•

Name

 – Name of the VLAN (1 to 32 characters).

•

Status

 – Enables or disables the specified VLAN. 

-

Enable

: VLAN is operational.

-

Disable

: VLAN is suspended; i.e., does not pass packets.

•

Port

 – Port identifier.

•

Trunk

 – Trunk identifier.

•

Membership Type

 – Select VLAN membership for each interface by marking the 

appropriate radio button for a port or trunk: 
-

Tagged

: Interface is a member of the VLAN. All packets transmitted by the port 

will be tagged, that is, carry a tag and therefore carry VLAN or CoS information.

-

Untagged

: Interface is a member of the VLAN. All packets transmitted by the 

port will be untagged, that is, not carry a tag and therefore not carry VLAN or 
CoS information. Note that an interface must be assigned to at least one group 
as an untagged port.

-

Forbidden

: Interface is forbidden from automatically joining the VLAN via 

GVRP. For more information, see “Automatic VLAN Registration” on page 11-2.

-

None

: Interface is not a member of the VLAN. Packets associated with this 

VLAN will not be transmitted by the interface. 

•

Trunk Member

 – Indicates if a port is a member of a trunk. To add a trunk to the 

selected VLAN, use the last table on the VLAN Static Table page.

Содержание 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды