SMC Networks 8926EM Скачать руководство пользователя страница 538

Страница: 538 / 792

Link Aggregation Commands

28-6

lacp admin-key

(Port Channel)

This command configures a port channel's LACP administration key string. Use the

form to restore the default setting.

Syntax

lacp admin-key

key

[

]

lacp admin-key

key

- The port channel admin key is used to identify a specific link

aggregation group (LAG) during local LACP setup on this switch.
(Range: 0-65535)

Default Setting

Command Mode

Interface Configuration (Port Channel)

Command Usage

• Ports are only allowed to join the same LAG if (1) the LACP system priority

matches, (2) the LACP port admin key matches, and (3) the LACP port
channel key matches (if configured).

• If the port channel admin key (

lacp admin key

- Port Channel) is not set when

a channel group is formed (i.e., it has the null value of 0), this key is set to the
same value as the port admin key (

lacp admin key

- Ethernet Interface) used

by the interfaces that joined the group. Note that when the LAG is no longer
used, the port channel admin key is reset to 0.

Example

lacp port-priority

This command configures LACP port priority. Use the

form to restore the default

setting.

Syntax

lacp

{

actor

partner

}

port-priority

priority

no lacp

{

actor

partner

}

port-priority

•

actor

- The local side an aggregate link.

•

partner

- The remote side of an aggregate link.

•

priority

- LACP port priority is used to select a backup link. (Range: 0-65535)

Default Setting

32768

Console(config)#interface port-channel 1
Console(config-if)#lacp admin-key 3
Console(config-if)#

Содержание 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8926EM

Отзывы:

Бренды по названию

Популярные бренды

SMC Networks 8926EM, Руководство по управлению

Результаты поиска

Содержание 8926EM

Отзывы:

Бренды по названию

Популярные бренды