manualshive.com logo in svg

SMC Networks 2586W-G, Руководство пользователя, Страница: 38 / 96

Поделиться
Скачать
SMC Networks 2586W-G Скачать руководство пользователя страница 38

The IP address of the SMC2586W-G can be manually set 

(Set Manually)

or

automatically assigned by a DHCP server on the LAN (

Obtain from a DHCP

Server – enabled by default).

If you are manually setting the 

IP address,

Subnet mask,

and 

Default gateway

settings, set them appropriately, so that

they comply with your LAN environment. In addition, you can specify the

Host name 

and 

Domain (DNS suffix)

of the SMC2586W-G.

DHCP Server

Fig. 36 Basic DHCP server settings.

The SMC2586W-G can automatically assign IP addresses to client computers
by DHCP. In this section of the management page, you can specify the

Default gateway, Subnet mask, Primary DNS server, and Secondary DNS
server

settings that will be sent to a client at its request. Additionally, you

can specify the first IP address that will be assigned to the clients and the
number of allocateable IP addresses.

NOTE: 

There should be only one DHCP server on the LAN; otherwise, DHCP

would not work properly. If there is a DHCP server on the LAN already, dis-
able the DHCP server functionality of the SMC2586W-G.

NOTE:

By default the DHCP server function is disabled.

37

Содержание 2586W-G

































































































Отзывы:

Нет отзывов