Operation
8-2
06/18/04
8.2 How to operate
1.When any keys are pressed in [AutoStart], the manual operation
becomes available. (The indication [AutoStart] disappears.)
2.The different 3 levels are available depending on the content,
which needs to be set.
Level 1 : Used normally and setting of target temp. and offset
are included.(
à
Refer to 8.3.)
Level 2 : Used at maintenance and initial setting and the setting
of control PID is included.(
à
Refer to 8.4.)
Level 3 : Used rarely for the purpose other than initial setting and
communication setting is included.(
à
Refer to 8.5)
3.[SEL]key
Used to show the item, which needs to be changed in
selected mode level.
4.[ ]key
Used to change the value of the item shown by[SEL]key.
To enter
SEL
To enter
SEL
+
SEL
To enter
+
RET
SEL
AT
THERMO-CON
P V < 3 0
.
0 ° C # 1
MO D E Au t o S t a r t
S V 3 0
.
0 ° C
RET
SEL
AT
THERMO-CON
RET
SEL
AT
THERMO-CON