SmarTV TouchPhone, Руководство пользователя

Страница: 10 / 70

Chapter 1 Features, Specifications, and Safety Information
1-4 SmarTV TouchPhone User Guide
Rear Panel Features and Connections
The rear panel (see following diagram) from left to right includes:
Reset switch recessed behind the rear panel •
DC power input jack for 48V DC external power supply (required for non-POE hotel networks) •
RJ45 jack with POE for VoIP connection to the hotel network •
Optional RJ45 jack for connecting an external PC to the hotel network through the phone •
Rear Panel Power and LAN Connections
Optional PC
LAN Jack
Network
LAN Jack
48V DC
Power
Input
Activity
LED
Link
LED
Reset
Switch
Reset Switch
The reset switch is recessed behind a small hole in the rear panel and can be pressed with a straightened
paper clip or other small-shafted object. Refer to the Troubleshooting chapter for information on the
proper use of this switch.
DC Power Input
The 48V DC power input jack accepts the barrel-plug end of a 48-volt DC power supply (not included with
phone) required for use with non-POE networks.
RJ45 Ethernet Jack with POE
This POE-equipped RJ45 LAN jack is for connecting the phone to the hotel network. When a high-speed
(100Mbps) network link is established, the Link LED turns green. The Activity LED will flash green when
the phone is communicating with the network.
Optional RJ45 Ethernet Jack (non POE)
This optional RJ45 LAN jack (selected models only) is for connecting an external PC to the hotel network
through the phone. When a high-speed (100MB/s) network link is established, the Link LED turns green.
The Activity LED will flash green when the external PC is communicating with the network.