CAT-601S Auto Transmission Cleaner and Fluid Exchanger User’s Manua
l
13
Menu of [Sensor Calibration], and then press OK key
to OK, the interface is as shown in Fig.37.
Fig.37
9) According to the prompts on the interface, OK the
current temperature value (Unit:
℃
), and then press
OK key to save the data. The interface is as shown in
Fig.38.
Fig.38
10) When the value is stable, press OK key again to
finish the temperature sensor calibration.
11) Select “Cleaning Speed” option in the Main Menu of
[Sensor Calibration], and then press OK key to OK
the interface as shown in Fig.39.
Fig.39
12) According to the prompts on the interface, load a
certain amount of detergent to a standard measuring
cup, and then press OK key to continue. The
interface is as shown in Fig.40.
Fig.40
13) According to the prompts on the interface, OK the
amount (such as 0.3L) of detergent to be added into
the system, and then press OK key to start adding.
The interface is as shown in Fig.41.
Fig.41
14) Observe the measuring cup
’
s scale change status,
press OK key to save the speed value when the
detergent amount in the standard measuring cup is
decreased by 0.3L. The Cleaning Speed calibration is
finished.
9.2 Select transmission fluid
This function can choose the type of transmission fluid.
There are four types and a kind of other types, if you don't
clear transmission fluid species, can choose other. As
shown in Fig.42.
Fig.42
9.3 Window Light Switch Setting
Select Window Backlight Switch and press OK key to
OK the setting interface as shown in Fig.43. Press OK
key to select on or off.
