CAT-601S Auto Transmission Cleaner and Fluid Exchanger User’s Manua
l
11
Fig.26
2) Input the amount to be filled, press OK key. As
shown in Fig.27
Fig.27
3) When the recharging is completed, the system will
automatically pop up print menu. Press OK key
select print, press RETURN key to cancel printing.
Refer to Fig.28
Fig.28
6.2 Decrease fluid amount
If the quantity of the ATF is more than the standard
amount, it is necessary to decrease the fluid amount
inside transmission (Lower the fluid level).
1) OK the menu of Adjust fluid level, select ‘Draining’, it
indicates that the fluid inside transmission is being
drained, as shown in Fig.26.
2) Input the amount to be drained, press OK key, and
then start the engine, the unit will drain the set
quantity of ATF to used fluid tank.
3) After the adjustment is completed and the unit will
prompt to finish. The system will automatically return
to the main menu.
7. Empty new fluid tank
1)
Be sure that the two hoses marked with “TO
TRANSMISSION” are not connected with the vehicle
to be maintained.
2)
Open the handle valve on the fluid hose marked with
“EMPTY”, and then place the hose into container.
3)
The system will OK into the interface for Empty new
tank, and automatically start fluid draining operation,
as shown in Fig.29.
Fig.29
4)
The unit will drain fluid until the hose marked with
“Empty” has no oil draining or press RETURN key to
stop draining operation.
8. Empty used fluid tank
1) Be sure that the two hoses marked with “TO
TRANSMISSION” are not connected with the vehicle
to be maintained.
2) Open the handle valve on the fluid hose marked with
“EMPTY”, and then place the hose into container.
3) The system will OK into the interface for Empty used
tank, and automatically start fluid draining operation.
4) The unit will drain fluid until the hose marked with
“Empty” has no oil draining or press RETURN key to
stop draining operation.
9. System setting
1) Select system setting item in main menu, press OK
key.
2) In the sub-item of system setting, select the desired
setting item. The interface is as shown in Fig.30(a)
and Fig.30(b).
Fig.30(a)
