6
POWERING UP
(Check off box when complete)
Apply external power by closing the main disconnect.
Close the L1/L2 breaker, the M24, PS, BR and EBR breakers.
Verify that the LCD on the Smartrise board and the Magnetek
Drive should come on.
FINAL SETUP
(Check off box when complete)
Toggle the Inspection/Normal switch to the “INSP” position.
Set
BYPASS TERM LIMITS
to
YES
:
o
On the Smartrise Machine Room controller board, press
the Left Arrow (ESC) button several times to get to the
MAIN SCREEN
.
o
Press the Right Arrow to go to
MAIN MENU.
Use the Up /
Down Arrow keys and move the asterix to
SETUP
and press
the enter key.
Green in Window
OFF
Red in Window
ON
Up = OFF
Down = ON
MAIN MENU
Status
Faults
*Setup
