Smartrise Magnetek HPV900AF, Руководство для стартапов

Страница: 9 / 13

9
If there are other faults during this process, refer to the fault section
of the Magnetek technical manual for diagnostic information.
HPV900AF DRIVE MENU TABLE
BASICS U9
PARAMETER DESCRIPTION CHOICES
DRIVE MODE DRIVE OPERATION OPEN LOOP
CLOSED LOOP
PM
AUTOTUNE SEL U12
PARAMETER DESCRIPTION CHOICES
AUTOTUNE SELECT ALLOW AUTOTUNE TO RUN DISABLE
ON RUN
YES
ROTOR ALIGN U10
PARAMETER DESCRIPTION CHOICES
ALIGNMENT ALLOW ALIGNMENT TO BE PERFORMED ENABLE
DISABLE
BEGIN ALIGNMENT DETERMINE WHEN TO PERFORM
ALIGNMENT YES
ON RUN
NO
ALIGNMENT METHOD HOW ALIGNMENT WILL BE PERFORMED OPEN LOOP
AUTO ALIGN
HF INJECT [SEE NOTE]
DRIVE INFO U6
PARAMETER DESCRIPTION CHOICES
DRIVE VERSION SHOWS THE SOFTWARE VERSION OF
THE DRIVE SOFTWARE SA4810-030-xxx.xx