HGM9510 GENSET PARALLEL UNIT
HGM9510 Genset Parallel Unit ISSUE 2013-08-06 Version 1.1 Page 42 of 65
While S1 and S2 are
TRUE
synchronously, OUTPUT;
While S1 or S2 is
FALSE
, NOT OUTPUT.
Period output S1, can set generator’s one or more period output freely, can set the delayed time
and output time after enter into period.
Condition output S2; can set as any conditions in output ports.
NOTE:
when delay time and output time both are 0 in period output S1, it is
TRUE
in this
period.
Output period: start
Delay output time: 2s
Output time: 3s
Condition output contents: output port 1 is active
Close when condition output active/inactive: close when active (disconnect when inactive);
Output port 1 active, after enter “starts time” and delay 2s, this defined period output is outputting,
after 3s, stop outputting;
Output port 1 inactive, defined output period is not outputting.
8.2.2 DEFINED COMBINATION OUTPUT
Defined combination output is composed by 3 parts, condition output S1 or S2 and condition
output S3.
S1 or S2 is
TRUE
, while S3 is
TRUE
, Defined combination output is outputting;
S1 and S2 are
FALSE
, or S3 is
FALSE
, Defined combination output is not outputting.
NOTE:
S1, S2, S3 can be set as any contents except for “defined combination output” in the
output setting.
NOTE:
3 parts of defined combination output (S1, S2, S3) couldn’t include or recursively
include themselves.
Example,
Contents of probably condition output S1: output port 1 is active;
Close when probably condition output S1 is active /inactive: close when active (disconnect when
inactive);
Contents of probably condition output S2, output port 2 is active;
Close when probably condition output S2 is active /inactive: close when active (disconnect when
inactive);
Contents of probably condition output S3: output port 3 is active;
