HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL
HAT880 Series Dual Power Bypass Controller 2019-07-11 Version1.1 Page 15 of 49
The indication information will continuously display for 2s after it is active.
Table 14 - Indication Information
No.
Item
Description
1
Please Reset The
Alarm
When there is fault alarm occurs, the indication will be displayed when
the genset mode is changed to Auto Mode manually.
2
S1 Already Closed.
The indication information for pressing S2 Close key when S1 is
already closed.
3
S2 Already Closed.
The indication information for pressing S1 Close key when S2 is
already closed.
5
Panel Locked
The information when panel lock is active and keys are pressed
(except for Up/Down/Confirm/Return keys).
Table 15 - Other Status Information
No.
Item
Description
1
Start Inhibit
Genset start inhibit input is active.
2
Remote Inhibit
Remote control inhibit input is active.
3
S1 Load Inhibit
S1 load inhibit input is active.
4
S2 Load Inhibit
S2 load inhibit input is active.
5
NEL 1 Trip
NEL1 off load signal is outputted.
6
NEL2 Trip
NEL2 off load signal is outputted.
7
NEL3 Trip
NEL3 off load signal is outputted.
8
Remote Gen On Load Remote start (on load) signal is active.
9
Remote Gen Off Load Remote start (off load) signal is active.
10
Gen Start Mains NG
Start genset when Mains is abnormal.
11
Cycle Start Mode
Active when S1 and S2 are both generating.
12
Balanced Running
Start Mode
Active when S1 and S2 are both generating.
13
Master/Backup Start
Mode
Active when S1 and S2 are both generating.
14
Auto Mode
Current mode is Auto mode.
15
Manual Mode
Current mode is Manual mode.
