SMARTGATE 2N Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 48

SMARTGATE 2N Скачать руководство пользователя страница 42

37

9.2.5. GSM & SIM Parameters

GSM operator lock

Provider blocking is set by manufacturer in SmartGate. If SmartGate is blocked to
a GSM provider, no other GSM provider's SIM card can be used. If an
unacceptable SIM card is used, the GSM module does not register to GSM and
the GSM network LED flashes quickly on the SmartGate panel.

CLIR – incognito

Sets the calling line identification restriction (CLIR) for outgoing calls from
SmartGate. Attention, before enabling it is necessary to activate this feature by
GSM operator, otherwise outgoing calls can be rejected by GSM network.

Setting options:

-According to provider - depending on how the function is selected

in the GSM network

-Activation

- ID is not sent.

-Suppression

- ID is always sent.

Default setting:

According to provider

Roaming enable/disable

You can make SmartGate work even if it is registered to a foreign GSM network.

Setting options:

-Disable

-The GSM module logs out of a foreign network and attempts to

register again in within 5 minutes.

-Enable

-SmartGate works in any GSM network.

Default setting: Disable

Time period for low credit checking

[h]

Set  to  change  time  interval  between  credit  checks.  If  your  credit  drops  under
defined  value,  SmartGate  sends  SMS  "LOW  CREDIT".  The  "0"  setting  means
that the function is disabled.
Setting options:   0-255  h

Step:

1 h

Default setting: 0

Code for credit checking

Credit in prepaid SIM cards is checked by network function, which displays text
message on mobile phone display. Code of network function must be terminated
with "#" symbol.
ATTENTION - find out if you have to pay for this function. Every check can lower
your credit.

Setting options: 0-8 characters (0-9,*,#,+)
Default setting: blank

«
...
40
41
42
43
44
...
»

Содержание 2N

















































Отзывы:

Нет отзывов