GP Series
21
©2013 Smarter Tools, Inc. All Rights Reserved
Inspection, Cleaning, and Maintenance (cont’d)
_________________________________________________________________________________________________
Spark Plug
1. Remove the spark plug cable from the spark plug.
2. Use the spark plug tool that shipped with your generator to remove the plug.
3. Inspect the electrode on the plug. It must be clean and not worn to produce the spark required for ignition.
4. Make certain the spark plug gap is 0.7 - 0.8mm (0.028 - 0.031 in.).
5. Carefully thread the plug into the engine.
6. Use the spark plug tool to firmly install the plug.
7. Attach the spark plug wire to the plug.
8. The following spark plugs cross for the Torch F6RTC;
NGK -BPR6ES, Champion -RN9YC, Autolite -63, Bosch -WR7DS, Denso -W20EPR-U.
Air Filter
1. Remove the air filter cover by releasing the
snap clips on top and bottom.
2. Remove the foam element.
3. Wash in liquid detergent and water.
4. Squeeze thoroughly dry in a clean cloth.
5. Saturate in clean engine oil.
6. Squeeze in a clean, absorbent cloth to remove
all excess oil.
7. Place the filter in the assembly.
8. Reattach the air filter cover and snap clips back
in place.
