SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
7
Below is a generic representation of a SmartRG gateway, Your specific model may have more or fewer ports and controls across the
back of the unit. Refer to the Quick Start Guide enclosed with your gateway for specifics regarding installation of your particular model.
The ports depicted in this example are described below.
DSL
The grey RJ12 port labeled DSL is specifically intended for connection to an internet provider via a DSL (Digital Subscriber Line) service.
The center pair carries the first DSL line. For models like the SR550n equipped with two DSL ports and bonded DSL capability, the outer
pair carries the second line.
WAN
A stand-alone RJ45 port labeled WAN enables your SmartRG gateway to be hard-wired to another network device with a RJ45/Ethernet
output such as a cable, fiber, or DSL modem.
For models with a stand-alone, RJ45, WAN port and a DSL port, the WAN port can be re-purposed to function as an additional LAN port
when your internet connection is via DSL.
For instructions to enable this SmartPort
TM
feature, see the
Ethernet Configuration section
in this manual.
