SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
45
These options represent 100 megabits or 10 megabits using half or full duplex transmission protocols. When you have a specific
device with a known limited transmission speed capability, select one of the latter four options. If you select
Auto
, your gate-
way will automatically select an appropriate setting based on Ethernet auto negotiation with the NIC of the LAN host.
Note:
Always select
Auto
for 1000 BaseT connections.
The following are the variations for the 500 series of gateways:
l
For the SR510 and SR552n models, the fourth port is shown on this page as eth3/LAN1 and the ports are listed in reverse
order.The eth4/WAN interface is also present on these models.
l
SR505n v2.5.0.x and later has an additional option of
1000 Full
for the LAN1/WAN port.
l
SR552n v2.5.0.6 and later has an additional option of
1000 Full
for all Ethernet interfaces.
3. Click
Apply/Save
to commit your changes.
MoCA
On this page, you can configure MoCA settings. The MoCA (Multimedia over Coax) protocol enables distribution of content over existing
in-home coaxial TV cabling at the same speed delivered by Ethernet networks.
Note:
This feature is available only on the SR512nm model.
1. In the left navigation bar, click
Advanced Setup
>
MoCA
. The following page appears.
2. Update or complete the necessary fields.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
