SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
28
Field Name
Description
ling all processes without priority (also known as cyclic executive).
Weighted Fair Queuing A data packet scheduling technique allowing different scheduling priorities to be
assigned to statistically multiplexed data flows. Since each data flow has its own
queue, an ill-behaved flow (that sent larger packets or more packets per second than
the others since it became active) will only affect itself and not other sessions.
Default Queue Weight Enter a default weight of the specified queue. Options are:
1
-
63
.
Default Queue Pre-
cedence
Enter a precedence for the specified queue. Options are:
1
-
8
.
Default Queue Min-
imum Rate
(
Does not appear for SR350n models
) The default minimum rate at which traffic can
pass through the queue. For no shaping, enter
-1
(disabled). Options are:
1
-
0
Kbps.
Default Queue Shaping
Rate
(
Does not appear for SR350n models
) The shaping rate for the specified queue. For no
shaping, enter
-1
(disabled). Options are:
1
-
0
Kbps.
Default Queue Shaping
Burst Rate
(
Does not appear for SR350n models
) The maximum rate at which traffic can pass
through the queue. Options are
1600
or greater.
ETH Interface
If you are using a gateway that is Ethernet-specific (non-DSL), you may want to configure an ETH interface to manage communication.
Most models support Ethernet and can be configured for Ethernet and DSL at the same time. Your gateway has four LAN ports. One of
them can be re-purposed to become an RJ45 WAN port when needed.
On this page, you can configure an Ethernet interface for your gateway.
1. In the left navigation bar, click
Advanced Setup
>
Layer2 Interface
>
ETH Interface
. If no WAN port is configured, the following
page appears.
