SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
74
On this page, you can configure static routes for your network. A static route is a manually configured, fixed route for IP data. You can
enter a maximum of 32 entries.
1. In the left navigation bar, click
Advanced Setup
>
Routing
>
Static Route
and then click
Add
. The following page appears.
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
IP Version
Select the IP version associated with the static route you wish to create.
Options are:
IPv4
and
IPv6
.
Destination IP address/-
prefix length
Enter the destination network address / subnet mask for route.
Interface
Select the WAN Interface for this route. This list filtered by the selected IP ver-
sion.
Gateway IP Address
Enter the destination IP address for this route. If needed, include the /prefix
length.
Metric
(
Optional
) Establishes traffic priority/weighting. Must be equal to or greater
than
zero
(> 0).
Policy Routing
