CHAPTER 4
CONFIGURING THE DISPLAY
39
4. Tap
Wi-Fi > … > Advanced > Install Certificates
.
The
USB Drive
window appears.
5. Tap
USB Drive
.
6. Select a certificate to install.
7. If required, enter a password to extract the certificate.
8. Optionally, enter a name for the certificate in the
Certificate name
box and reason for
certificate use in the
Credential use
box. Tap
OK
.
A window appears requesting that a lock screen PIN, pattern or password be set before using
the certificate.
9. Tap
OK
.
10. Select a pattern, PIN or password method. Tap
OK
.
IMPORTANT
Make note of the pattern, PIN or password. The pattern, PIN or password may be required to
install future certificates.
If the pattern, PIN or password is forgotten, a factory reset is required before installing more
certificates.
The iQ system software confirms the certificate was installed.
Connecting the display to a network
To connect to a Wi-Fi network
1. Tap the
Menu
button on the front control panel.
The display’s settings appear.
2. Tap
Network
.
3. Ensure
Wi-Fi
is enabled and
Ethernet
is disabled.
4. Select a wireless network.
If the Wi-Fi network is not password protected, the display connects to the network.