Smart Technologies SBID-MX265, Руководство по установке и обслуживанию, Страница: 103 / 110

CHAPTER C
REMOTELY MANAGING THE DISPLAY
91 smarttech.com/kb/171257
Volume
Get command Set command Response
get volume set volume [Value]
Where
[Value]
is one of the following:
l
+ [Value]
l
- [Value]
l
= [0–100]
volume= [Value]
Where
[Value]
is a number between 0
and 100
Mute
Get command Set command Response
get mute set mute [Value]
Where
[Value]
is one of the following:
l
=on
l
=off
mute= [Value]
Where
[Value]
is one of the following:
l
on
l
off
Firmware version
Get command Response
get fwversion fwversion= [Value]
Where [Value] is the firmware version.
Serial number
Get command Response
get serialnum serialnum= [Value]
Where
[Value]
is the display’s serial number.
NOTE
If multiple displays are connected, the response includes
the serial numbers for all displays, separated by commas.
Part number
Get command Response
get partnum partnum= [Value]
Where
[Value]
is the part number, including the revision.