Smart Technologies Board 8084i-G4, Руководство администратора

Страница: 3 / 96

i smarttech.com/kb/170819
Important information
WARNING
l
Failure to follow the installation instructions shipped with the room system could result in
injury and product damage which may not be covered by the warranty.
l
Ensure your installation complies with local building and electrical codes.
l
Do not open or disassemble the room system. You risk electrical shock from the high
voltage inside the casing. Opening the casing also voids the warranty.
l
Do not stand (or allow children to stand) on a chair to touch the surface of the room system.
Rather, mount the product at the appropriate height.
l
To reduce the risk of fire or electric shock, do not expose the room system to rain or
moisture.
l
If the room system requires replacement parts, make sure the service technician uses
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
l
Ensure that any cables that cross the floor to the room system are properly bundled and
marked to avoid a trip hazard.
l
Do not insert objects inside the cabinet ventilation holes, because they could touch
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
l
Do not place any heavy objects on the power cable. Damage to the cable could cause
shock, fire or product damage which may not be covered by the warranty.
l
Use only extension cords and outlets that can fully accommodate the room system’s
polarized plugs.
l
Use the power cables provided with the room system. If a power cable is not supplied,
please contact your supplier. Use only power cables that match the AC voltage of the
power outlet and that comply with your country’s safety standards.
l
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
fragments with care when disposing of them.