CHAPTER 2
MAINTAINING THE ROOM SYSTEM
15
smarttech.com/kb/170819
6. Press the icon of the interactive flat panel you want to calibrate.
TIP
When you press an interactive flat panel’s screen, the circle beside that interactive flat
panel’s icon turns blue.
7. Select
Advanced Settings
from the drop-down list.
8. Press
Calibrate
.
The calibration screen appears. This can take a few moments.
NOTE
If the calibration screen doesn’t appear on the selected interactive flat panel, move it to the
selected interactive flat panel by pressing the spacebar on the keyboard.
9. Follow the on-screen instructions to calibrate the interactive flat panel.
A message appears stating that the calibration was successful, and then the orientation screen
appears.
10. Orient the interactive flat panel (see
Orienting the interactive flat panels
11. On the console, press
OK
.
SMART Settings closes.
12. On the console, press
Apply & Restart
.
The room system restarts.
Orienting the interactive flat panels
Typically, the interactive flat panels require orientation during initial configuration only. However,
you might need to orient the interactive flat panels again if the location of users’ touch is
misinterpreted (a pointer appears a distance from the actual contact or on a different display than
the one being touched).
IMPORTANT
l
The interactive flat panels must be oriented from the Skype for Business Admin Console.
You will need the room system administrator account’s user name and password.
l
If your room system includes SMART Board 8055i-G5 or 8065i-G5 interactive flat panels,
ensure version 15.12.02 or later of Skype for Business Room System software is installed
before you attempt to orient the interactive flat panels (see
Содержание Board 8084i-G4
Страница 62: ......
Страница 90: ......
Страница 95: ......
Страница 96: ...SMART TECHNOLOGIES smarttech com support smarttech com support entsupport smarttech com kb 170819 ...