Page
16
of
21
©Smart-e(UK) Ltd.
SDS-7000 User Manual
Installation and Operation
Configuration – IP Control
A very useful feature of the SDS presentation switch is the ability to control the unit via
Ethernet. This means the unit can be controlled from a remote location, be that in the same
building as the unit itself or from anywhere in the world, simply by connecting the unit to an
accessible network.
NOTE: Ensure SDS presentation switch is attached to network via Ethernet port prior to
the unit being powered, the unit will only allocate an IP address on power up, attaching
unit to network after this will result in the control over IP functionality being unavailable.
The Protocol document for the SDS presentation switch can be found on the product page:
www.smart-e.co.uk/product-range/sds-7000
The Smart-e control application can be downloaded from the Smart-e website:
www.smart-e.co.uk/downloads/software
Ethernet Control Settings
IP Address
192.168.1.190
Port
6666
