Page
13
of
21
©Smart-e(UK) Ltd.
SDS-7000 User Manual
Installation and Operation
Configuration – Image Settings
The SDS presentation switch and scaler has the ability to alter the brightness and contrast of
the content being sent through the HDMI and HDBaseT outputs.
Firstly press the MENU button
Turn the Parameter wheel until ‘Image Settings’ is seen on the LCD display and press
ENTER
Turn the Parameter wheel until the desired setting is displayed, contrast or
brightness, and press ENTER
The LCD should now be displaying the current value of this setting
Turn the Parameter wheel until the desired value has been reached and press
ENTER
NOTE: The contrast and brightness will not update whilst the parameter wheel is turned,
the new setting will only take effect once the ENTER button has been pressed
You should now see the change has taken effect on the video output and a bar should
have appeared on the bottom of the screen showing the parameter which has been
altered with its new value
The LCD display will display the message, ‘SETTING OK’ showing the command has
been sent and accepted
EXAMPLE OF IMAGE SETTINGS
BAR SEEN ON VIDEO OUTPUT
EXAMPLE OF SUCCESSFUL IMAGE SETTINGS CHANGE ON LCD SCREEN
