Page
5
of
21
©Smart-e(UK) Ltd.
SDS-7000 User Manual
Installation and Operation
Before beginning the installation process ensure that all video displays and audio outputs are
compatible with the specification of the SDS Presentation Switch/Scaler. The best
procedure, if not sure about how to do this, is to connect the source devices directly to the
output devices and ensure successful operation without any Smart-e equipment connected.
Once this has been verified the sources and outputs can be connected to the switch. Below is
a list of the accepted input/output formats, resolutions, frame rates and interconnects:
ANALOGUE CVBS/YPbPr
Gain
0dB
Bandwidth
150MHz @ -3dB
Format
NTSC,PAL,SECAM
Differential phase error
0.1°,3.58-4.43 MHz
Differential gain error
0.1%,3.58-4.43 MHz
Switching speed
200 ns(the maximum time)
Signal type
Composite video(CVBS), Component video(YPbPr/YCbCr)
Interface
RCA female joint(4PIN),1(CVBS),1(YPbPr/YCbCr)
Minimum / maximum level
Analog signal: -2V/+2V
Impedance
75
Ω
Return loss
<-30dB@5MHz
ANALOGUE VGA VIDEO
Gain
0 dB
Bandwidth
380 MHz
Signal type
VGA
Interface
15-pin HD female interface,2 VGA inputs
Signal strength
0.63V p-p to 0.9 V p-p
Impedance
75
Ω
Return loss
<-40dB@5MHz
DC compensation
Maximum ±5mV
Supported resolution
640x480@60Hz;800x600@60Hz;1024x768@60Hz;
1280x720@60Hz;1280x800@60Hz;1280x960@60Hz;
1280x1024@60Hz;1360x768@60Hz;1366x768@60Hz;
1400x1050@60Hz;1440x900@60Hz;1600x1200@60Hz;
1680x1050@60Hz;1920x1080@50Hz;1920x1080@60Hz;
1920x1200@60Hz
