SMART Board Board 600i6, Конфигурация и руководство пользователя

Страница: 32 / 117

C H A P T E R 3
Using your interactive whiteboard system
19
Setting Use Notes
Location Displays the projector’s
location as set by an
administrator (maximum 16
characters). You can set the projector’s location using the
remote management features (see
Remotely
managing your system through a network
interface
on page 55 and Remotely managing
your system through an RS-232 serial
interface
on page 63).
Contact Displays the contact name
or number for projector
support as set by an
administrator (maximum 16
characters). You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface
on page 55 and Remotely
managing your system through an RS-232
serial interface
on page 63).
Language menu
Language Selects language
preference. Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours Displays the current number
of lamp usage hours from 0
to 4000 hours from when it
was last reset. Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
Resetting the lamp hours on page 40 for
details on the lamp hours reset procedure.
Input Displays the currently
displayed video input source
(
VGA-1 , VGA-2 , HDMI
or None ).
Resolution Displays the projector’s
most recently detected video
source signal resolution and
refresh rate. If there is no current video input source signal,
this setting displays the last known source
signal image resolution and refresh rate.
Firmware
Version Displays the projector’s
digital display processor
(DDP) firmware version in
x.x.x.x format.
MPU Version Displays the projector
microprocessor unit (MPU)
firmware version in x.x.x.x
format.