SMART Board Board 600i6, Конфигурация и руководство пользователя, Страница: 52 / 117

C H A P T E R 5
Maintaining your interactive whiteboard system
39
5. Use a Phillips screwdriver to loosen the two captive screws from the bottom of the lamp
module and gently remove lamp module.
A
B
N O T E
Don’t try to remove these screws. Captive screws can’t be removed, only loosened.
To put the new lamp module into the projector
1. Remove the new lamp module from its packaging.
2. Carefully place the lamp module into the projector and gently press the power end of the
lamp module against the projector to ensure that the power plug makes contact with the
projector’s power port.
A
B
N O T E
You should be able to place the lamp module into the projector easily without applying
much force.
3. Use the Phillips screwdriver to secure the captive screws.
I M P O R T A N T
Do not over-tighten the screws.
4. Replace the lamp cover.
5. Connect the power cable to the wall socket.