SMAR HI302, Руководство пользователя

Страница: 70 / 92

HI302 – User’s Manual
A.6
Index Parameter Data Type Valid Range / Options Default Value Units Store/Mode Description
HART
Read
Hart
Write
82
S3_UC Enumerated HC TABLE 2 0 None D Slot 3 variable Units Code.
9 or 33 53
83 S3_VAL DS-65 0 S3_UC D / RO
S3_VAL.Value : actual Slot 0 variable Value,
S3_VAL.Status : HART Response Code.
9 or 33
84 S3_STATUS Unsigned8 0 None D / RO Slot 3 variable Status. 9
85
MESSAGE VisibleString(32) Spaces NA D Message.
12 17
86 DESCRIPTOR VisibleString(16) Spaces NA D Descriptor. 13 18
87 DATE_INFO Date
1/1/2001
00:00:00:0000
NA D Date (Only Day/Month/Year are considered). 13 18
88
WRITE_PCODE Enumerated HC TABLE 7 0 None D / RO Write Protect Code.
15
89 PLDC Enumerated HC TABLE 8 0 None D / RO Private Label Distributor Code. 15
90 PV_ACF Enumerated HC TABLE 26 0 None D / RO PV Analog Channel Flags. 15
91
FAN OctString(3) 0 NA D Final Assembly Number.
16 19
92 SPEC_STATUS_I OctString(6) 0 NA D / RO Device specific Status I. 48
93 OP_MODE Enumerated HC TABLE 14 0 None D / RO Device operating mode. 48
94
AC_SATURATED OctString(3) 0 NA D / RO Analog Channel Saturated.
48
95
AC_FIXED OctString(3) 0 NA D / RO Analog Channel Fixed.
48
96 SPEC_STATUS_II OctString(11) 0 NA D / RO Device specific Status II. 48
97 DEV_TEST Unsigned8 0 None D
Write any value to perform a device self test and read
additional status.
41
98 DEV_RESET Unsigned8 0 None D
Write any value to perform a device Master RESET
and makes a device reidentification.
42
99 BURST_MODE Enumerated HC TABLE 9 0 None D It allows to control device's Burst Mode 109
100
UPDATE_EVT DS-73 NA D This alert is generated by any change to the static data.
101
BLK_ALM DS-72 NA D
The block alarm is used for all configuration, hardware, connection failure or
system problems in the block. The cause of the alert is entered in the
subcode field. The first alert to become active will set the Active status in the
Status attribute. As soon as the Unreported status is cleared by the alert
reporting task, another block alert may be reported without clearing the
Active status, if the subcode has changed.