SMAR HI302, Руководство пользователя

Страница: 66 / 92

HI302 – User’s Manual
A.2
Index Parameter Data Type Valid Range / Options Default Value Units Store / Mode Description
22 BYPASS_STATUS Unsigned8[8]
0x00: Idle,
0x01: Busy,
0x02: Timeout
0x00: Idle, D / RO
This array shows the status of the bypass execution for all the channels
and must be supervised for response check purposes.
23 BYPASS_REQ_1 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
24 BYPASS_RES_1 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
25 BYPASS_REQ_2 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
26 BYPASS_RES_2 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
27 BYPASS_REQ_3 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
28 BYPASS_RES_3 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
29 BYPASS_REQ_4 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
30 BYPASS_RES_4 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
31 BYPASS_REQ_5 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
32 BYPASS_RES_5 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
33 BYPASS_REQ_6 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
34 BYPASS_RES_6 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
35 BYPASS_REQ_7 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
36 BYPASS_RES_7 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
37 BYPASS_REQ_8 OctString(100) NA D
This parameter allows the user to send and entire HART frame trough the
channel.
38 BYPASS_RES_8 OctString(100) NA D / RO
This is the response grabbed by the channel if the addressed device has
replied.
39 UPDATE_EVT DS-73 NA D This alert is generated by any change to the static data.
40 BLK_ALM DS-72 NA D
The block alarm is used for all configuration, hardware, connection failure
or system problems in the block. The cause of the alert is entered in the
subcode field. The first alert to become active will set the Active status in
the Status attribute. As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be reported without clearing
the Active status, if the subcode has changed.