SMAR FY302, Инструкция по установке, эксплуатации и обслуживанию

Страница: 43 / 66

Configuration
3.11
Type of access:
monitoring and
acting upon the
parameter
This mnemonic
characterizes the
parameter that appears
on the display
Relative index to
selected
parameter
Specifies the block
tag where the
desired parameter is
parameter.
A group of
parameters must
be set to show
and/or act on a
given parameter in
the local
adjustment.
Figure 3.20 – Display of the Transducer – Configuration
The display block is handled as a common function block. This means that this block can be
configured by Syscon, setting parameters and choosing values according to the user's needs.
The LCD display can be used for parameter monitoring or performance
Local Programming Tree
The programming tree is a menu system that allows the configuration of the most important
items. The menu is configured through the display block.
Each field device is supplied with a factory default setting.
There is a default setting for each type of field equipment, but usually it includes the tag, the
output or input of the transducer block as a monitoring parameter and calibration parameters
as shown on Table 3.1:
Parameter Function Class
Tag Monitoring Read
Primary Value Monitoring Read
Lower Calibration Read/Write
Upper Calibration Read/Write
Table 3.1 - Configuration Indicator Example