SMAR FP302, Руководство по эксплуатации и техническому обслуживанию владельца

Страница: 23 / 66

Configuration
3.5
Idx Parameter Type
Range
Valid
Initial
Value
Unit Memory Description
hardware or software on the
Transducer
7 UPDATE_EVT DS-73 - - Na D Alert for any static data.
8 BLOCK_ALM DS-72 - - Na D
Parameter used for configuration,
hardware or other failures.
9 TRANSDUCER_DIRECTORY
Array of
Unsigned16
- - None N
Selection of several Transducer
Blocks.
10 TRANSDUCER_TYPE Unsigned16 - Other None N Type of Transducer per class
11 XD_ERROR Unsigned8 -
Default value
set
None D Calibration status.
12 COLLECTION_DIRECTORY
Array of
Unsigned 32
- - None S
Transducer index number on the
Transducer Block
13
FINAL_VALUE DS-65 - - FRV D
AO block desired pressure and
status
14 FINAL_VALUE_RANGE DS-68 - - FRV S
Upper and lower values,
engineering units and number
of decimal places to be used on
FINAL_VALUE
15 CAL_POINT_HI Float 12-32 psi 30 CU S Upper Calibration Value
16 CAL_POINT_LO Float 2.5-5 psi 3 CU S Lower Calibration Value
17 CAL_MIN_SPAN Float - 7 CU S
Minimum allowed span value. This
information is needed so that both
upper and lower calibration points
are not too close after calibrating.
18 CAL_UNIT Unsigned16 - Psi E S
Engineering unit of the Equipment
description for the calibration
values.
19 CONV_SN Unsigned32 - - None S Converter serial number
20 CAL_METHOD Unsigned8 - Factory None S
Method used on last sensor
calibration.
21 ACT_FAIL_ACTION Unsigned8 - - None S
Specifies the actuator action in
case of failure.
22 ACT_MAN_ID Unsigned32 - - None N
Actuator manufacturer
Identification number.
23 ACT_MODEL_NUM VisibleString - NULL None N Actuator model number
24 ACT_SN VisibleString - - None N Actuator serial number.
25 VALVE_MAN_ID Unsigned32 - - E N
Valve manufacturer identification
number.
26 VALVE_MODEL_NUM VisibleString - NULL None N Valve model number.
27 VALVE_SN VisibleString - - None N Valve serial number.
28 VALVE_TYPE Unsigned8 - - E N Valve type
29 XD_CAL_LOC VisibleString - NULL None S
Place of last equipment
calibration.
30 XD_CAL_DATE Time of Day - - None S Date of last equipment calibration
31 XD_CAL_WHO VisibleString - NULL None S
Name of last person who made
the Calibration.
32
SECONDARY_VALUE DS-65 - - SVU D
Secondary value related to the
temperature sensor.
33 SECONDARY_VALUE_UNIT Unsigned16 -
°
C
E S
SECONDARY_VALUE
engineering unit parameter
34 SENSOR_RANGE DS-68 - 3-30 psi FRV S
Pressure sensor upper and
lower value, engineering unit
and number of decimal points.
35
BACKUP_RESTORE Unsigned8
See table
None None S
Parameter for backup or to
recover configuration data.
36 COEFF_PRESS_POL0 Float
±
INF - None S Pressure Zero coefficient.
37 COEFF_PRESS_POL1 Float
±
INF -
None
S Pressure 1 coefficient..
38 COEFF_PRESS_POL2 Float
±
INF -
None
S Pressure 2 coefficient..
39 COEFF_PRESS_POL3 Float
±
INF -
None
S Pressure 3 coefficient.
40 COEFF_PRESS_POL4 Float
±
INF -
None
S Pressure 4 coefficient
41 COEFF_PRESS_POL5 Float
±
INF -
None
S Pressure 5 coefficient..
42 COEFF_PRESS_POL6 Float
±
INF -
None
S Pressure 6 coefficient.
43 COEFF_PRESS_POL7 Float
±
INF -
None
S Pressure 7 coefficient.