Smalvic FI NB60, Инструкция по использованию, установке и обслуживанию

Страница: 25 / 29

9880022300-EN-180714.doc
25
EN
It is necessary to create an opening in the rear part of the bottom of the cabinet or in the
oven support shelf, to allow sufficient air to circulate for the cooling of the oven during
functioning.
Ensure the oven is safely installed inside the cabinet. Use screws
A
, for fixing the oven.
■
ELECTRIC CONNECTION OF THE OVEN
■
Ensure the electric current has been disconnected before connecting the oven to the
electric mains.
The oven requires single-phase alternate current 220-230-240 V~ 50-60 Hz, using
flexible cable. Ensure the household power supply can support the electric load of the
device. (see serial plate). The electric safety of this appliance is only assured if the same
is correctly connected to a system having efficient earth connection, according to the
legal Standards in force.
In case of permanent connection to the electric mains, apply a bipolar switch
dimensioned to the corresponding load, with opening for each contact of at least 3 mm
in accordance with the current local regulations. In models where present, the flexible
cable is supplied without plug. The plug to be used must be suitable for the electric load
of the product and must comply with the current regulations.
The installer must ensure that the socket is suitable for the power absorbed by the oven
as indicated on the serial plate.
The connection socket must be easily accessible. Disconnection of the appliance from
the electrical supply must be allowed after installation is made.