Smalvic FI NB60, Инструкция по использованию, установке и обслуживанию

Страница: 16 / 29

9880022300-EN-180714.doc
16
EN
■
REMOVING/MOUNTING OF THE OVEN DOOR
■
To remove and insert the oven door, follow the instructions below.
Fully open the door and in both hinges insert a metal rod (not supplied) with a diameter
of about 3 mm in the hole shown in the figure.
Pressed door model Door model with profiles
Grasp the door with both hands on the sides down. Lift the door slightly and remove the
hinges from 2 locations. Pull the door toward you to release the hinges from the
openings of the frame of the oven.
Re-insertion of the oven door
Act in reverse order, holding the door sideways with both hands towards the bottom and
inserting the hinges in the openings of the front oven frame, (pay attention to the
positioning of the foot joint)
. With the oven door fully opened, remove the two metal
rod from hinges.
Close the oven door slowly and make sure that it has been correctly inserted and aligned
with the lateral edges.
Attention!
With the door dropped, never remove the 2 metal rods that hold the hinges locked.
Do not rest weights on the door or hang them on the handle, they could damage the
products, creating malfunctions
Moreover, do not use the oven until the oven door has been re-mounted correctly.