Smalvic FI NB60, Инструкция по использованию, установке и обслуживанию

Страница: 22 / 29

9880022300-EN-180714.doc
22
EN
■
REPLACING THE OVEN LIGHT BULB
■
To prevent electric shocks and/or damage to persons, read and follow the
procedure given below:
WARNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
Ensure that the oven and the light bulb are cold and then remove the protection cover
A
Do not touch the hot bulb with a damp cloth, the bulb may break.
Replace the light bulb with another suitable one of 25 W for 220 - 230 V with
attachment type E14 suitable for high temperatures.
In case the protection cap is damaged or broken, do not use the oven until the cap has
been replaced or re-inserted correctly and safely.
Attention: for correct installation and use of this appliance, refer to the technical
data given on the serial label of the product
.
The product label is on the edge of the internal side of the oven. A second label is
found on the cover of the instruction book.
■
INSTALLATION INSTRUCTIONS
■
The installation and technical assistance must only be performed by qualified staff.
Carefully read the safety instructions in this manual before using the oven.
Incorrect installation, maintenance, assistance and use can cause serious
damage/injury to persons or objects
This product must be installed as instructed in this manual and in compliance with
National Standards and local regulations in force.
Do not lift or pull the oven from the door handle and do not force or load weights
when this is open.