manualshive.com logo in svg

SMA Sunny Boy 6000, Руководство по установке

Поделиться
Скачать
SMA Sunny Boy 6000 Скачать руководство пользователя страница 68

Displays and Messages

7-14

SMA America

SB6000U-13:SE2506

Communication Options

Sunny Boy inverters are available with different communication options depending upon 
your needs. The Sunny Boy 6000U series allows for both internal and external metering 
options to be used simultaneously. These options may also be installed in the field by 
qualified personnel.

PC Applications and Monitoring

Sunny Boy operating data may be transmitted to, and stored in, a remote system or PC 
by one of the following methods: 

•

Powerline:

 Data is sent using the electrical wiring in the building as transmission lines. 

Powerline communication is only supported by one of the Sunny Boy Control devices.

•

RS-232:

 Data from one inverter is sent via an RS-232 cable to a remote control unit or PC. 

Maximum length of cable is 50’ (15 m).

•

RS-485:

 Data from up to 50 inverters is sent via RS-485 cable to a remote control unit or 

to a PC. Maximum length of cable is 4000’ (1200 m). An RS-485/232 converter may be 
necessary for communication with a PC.

Sunny Data

This Windows based application has a user friendly graphical interface that allows you 
to continuously acquire and evaluate the performance data from your PV system. Each 
Sunny Boy inverter and the PV strings connected to them can be viewed independently 
for optimal performance evaluation.

Sunny Data Control

This PC application is used to communicate with the Sunny Boy Control products. It can 
be used to monitor multiple inverters, download historical system data and adjust system 
parameters. It can also send system data to the Sunny Server portal via analog modem 
or ethernet.

Sunny Boy Control Family

The Sunny Boy Control products provide continuous monitoring and data acquisition of 
your PV system. In addition to the original Sunny Boy Control, you can now choose 
between the economical Sunny Boy Control Light or the full featured Sunny Boy Control 
Plus.

For more information and assistance in choosing the right data option for your system, 
please visit the SMA America web site.

http://www.wholesalesolar.com/inverters.html

http://www.wholesalesolar.com/inverters.html

Содержание Sunny Boy 6000



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды