SMA SUNNY BOY 1700, Руководство по установке

Страница: 25 / 48

SMA Technologie AG Installation
Installation Guide SB1700-11:SE2006 Page 25
5. Now screw the pressure screw into into
the threaded sleeve and tighten it.
6. Firmly tighten the screw fitting against
the seal and in order to fasten the cable.
The AC connecting socket is now fully assembled.
If you are not going to connect up the Sunny Boy immediately, close off the socket
element using the cap included in the delivery of your Sunny Boy.
If the Sunny Boy is already mounted, you can now connect up the assembled AC
connection socket to the AC-plug on the Sunny Boy. To do this, remove the protective
cap from the plug on the Sunny Boy. Firmly tighten the threaded ring on the AC
connecting socket to the plug to seal the connection and secure it.
Do not switch the line circuit breaker on yet! The Sunny Boy 1700
may only be connected to the AC grid once the PV strings are
connected and the device is securely closed.
Pressure screw
PG16 screw fitting