Universal Live Timing Box Rev 2.0 User manual
6 Universal Live Timing Box assembly on SCP-01 controller
Those owning the Slot.it SCP-01 controller can assembly their
Universal Live Timing Box
on the
controller itself, thus creating a single and very convenient structure.
In order to do this, the following procedure has to be followed:
1. open the SCP-01 controller's plastic shell and remove the electronic circuit from it,
unscrewing the three anchor screws;
2. remove the frame on the back side of the shell, unscrewing the four screws;
3. insert the feet of the
Universal Live Timing Box
into the free holes on the back side of the
shell;
4. lock the
Universal Live Timing Box
with the same screws removed in step 2;
5. reassemble the PCB removed in step 1;
6. close the shell again: now the controller is fully assembled. The final result is shown in
figure 11;
7. insert the USB white cable's male plug (10) of the
Universal Live Timing Box
into the USB
connector of the SCP-01 controller;
8. power the SCP controller.
Once the listed steps have been followed, the LED (5) of the
Universal Live Timing Box
throws a
steady red light and the lot is ready for use.
17
Figure 11: Universal Live Timing Box assembled on SCP
controller.
