Universal Live Timing Box Rev 2.0 User manual
the car is positioned on the first or the second lane. Then, for the connection to be complete, insert
the male plug of the "
Connection cable
" of the SCP-01 controller into the USB female plug of the
"
Track to Telemetry cable
" of the
Track Interface
. The final result is shown in figure 30.
15.5 Connection to the Slot.it Universal Live Timing Box
In order to connect the
Track Interface
to the Slot.it
Universal Live Timing Box
, you only need to
use the "
Track to Telemetry cable
" of the
Track Interface
, which can be found in the pack. You only
need to insert the male jack plug of the latter into the female jack plug (7) or (8) according as the
car is positioned on the first or the second lane. Then, for the connection to be complete, you only
have to insert the male plug of the USB white cable(10) of the
Universal Live Timing Box
into the
USB female plug of the "
Track to Telemetry cable
" of the
Track Interface
. The final result is shown
in figure 31. Once the
Track Interface
is powered, the
Universal Live Timing Box
is powered, too.
The user can check it by making sure that the LED (5) of the
Universal Live Timing Box
throws a
red light.
15.6 Connection to other Track Interfaces
Until now we have seen that a single
Track Interface
is able to manage only two sensors on the
same lane. What is to be done if the user wishes to use more than one sector sensor? It is necessary
to take another
Track Interface
and the "
Sector Time Expansion Cable
" (sold separately) and follow
this procedure:
1. Set the new
Track Interface
so that it manages the two additional sensors as sector sensors
(see how to do it in paragraph 16.3 );
2. insert one of the male jack plugs of the Expansion Cable into the female jack plug (7) or (8)
of the
Track Interface
, according as the car is positioned on the first or the second lane;
37
Figure 31: connection of the Track Interface to the Universal Live Timing
Box.